Tyre Size Guide
Find Your Tyre
/ Tyre Range / Passenger Car /

LS388 RSC

Landsail runflats are engineered with reinforced sidewalls. If a puncture occurs, Landsail runflat technology provides additional carcass strength to support the vehicle without air, enabling the driver to continue moving to safety.

Enhanced Stability Exceptional Wet-Weather Grip Low Noise
High Stability Centring Rib
The solid rib in the centre of the tyre ensures straight-line driving stability
Wet Grip Groove Design
Four wide, longitudinal grooves channel road water, while lateral grooves work to direct it out from under the tyre
Low Tread Wear Shoulder Design
The shoulder is integrated with heat-resisting bars to keep the tread blocks stable and protect them from irregular wear. For the same reason, the design also improves high-speed cornering stability
Fuel-Saving Tread Compound
The LS388’s advanced tread compound reduces rolling resistance, which helps boost fuel efficiency and lower exhaust emissions
Quiet-Ride Pitch Alignment
Optimised tread pitch width and alignment for quiet resonance and reduced road noise

Ready to purchase?
Find a Dealer

Find a dealer
Find a Landsail Tyres dealer image banner

Tyre Size Guide

A : SECTION
The normal width of the tyre
B : PROFILE
The aspect ratio, this mark represents the height of the tyre sidewall
C : RIM
The diameter of the tyres inner rim in inches
D : LOAD
Load capacity of the tyre
E : SPEED
The maximum speed for this tyre at full load

Understanding The EU Tyre Label

Fuel Efficiency

Rolling resistance has a direct impact on fuel consumption. A tyre's rolling resistance score ranges from A to G. Over the life of the tyre, fitting an A rated tyre could save you up to 6 litres more fuel every 625 miles - when compared to a G rated tyre.

Wet Grip

A tyre's wet grip capacity is expressed in Grades from A to G. The difference in braking distances between each grade is roughly 3m - an average car length. This makes average stopping distance between an A and G rated tyre 18m. That's 4 car lengths.

Noise Levels

The exterior noise grade of a tyre is expressed in decibels - accompanied by one, two or three sound waves, with one wave being the best noise level performance. To achieve the best grade, a tyre’s noise level must be at least 3dB under the legal limit set by the EU.